<DESC1 VAL="Welcome to the D-Link ShareCenter (DNS-320) "/> <DESC1 VAL="Setup Wizard. This wizard will guide you through "/> <DESC1 VAL="the setup of your D-Link storage device."/> <DESC1 VAL=""/> <DESC2 VAL="It is recommended that a wired ethernet connection "/> <DESC2 VAL="be used when running the setup wizard to prevent "/> <DESC2 VAL="unexpected network connection errors."/> <DESC2 VAL=""/> <FIELD1 VAL="Select your Language:"/> </PAGE_WELCOME> <PAGE_PULL_FACEPLATE> <TITLE VAL="Pull The Top Out"/> <DESC1 VAL="Access the drive bays by sliding"/> <DESC1 VAL="the top back until it unlatches"/> <DESC1 VAL="from the device."/> <DESC1 VAL=""/> <DESC2 VAL="Once the faceplate is unlatched,"/> <DESC2 VAL="pull it off the device to expose the"/> <DESC2 VAL="device's bays."/> <NOTE1 VAL="Click NEXT to continue."/> </PAGE_PULL_FACEPLATE> <PAGE_INSERT_DISK> <TITLE VAL="Install The Hard Drive(s)"/> <DESC1 VAL=""/> <DESC1 VAL="Align the drives with the grooves in the enclosure, insert one or two 3.5” SATA hard "/> <DESC1 VAL="drives into the drive bays until they are firmly seated. If a drive has been inserted "/> <DESC1 VAL="incorrectly, the LED will not light up."/> <DESC1 VAL=""/> <DESC1 VAL=""/> <NOTE1 VAL="Click NEXT to continue."/> </PAGE_INSERT_DISK> <PAGE_ATTACH_FACEPLATE> <TITLE VAL="Attach The Faceplate"/> <DESC1 VAL="Re-attach the top cover to the device."/> <NOTE1 VAL="Click NEXT to continue."/> </PAGE_ATTACH_FACEPLATE> <PAGE_CONNECT_NETWORK> <TITLE VAL="Connect To Your Network"/> <DESC1 VAL="Connect an Ethernet cable to the Ethernet port of your DNS-320."/> <DESC1 VAL="This cable should connect your DNS-320 to your local network"/> <DESC1 VAL="via a router or switch, or directly to a computer for configuration."/> <DESC1 VAL=""/> <NOTE1 VAL="Click NEXT to continue."/> </PAGE_CONNECT_NETWORK> <PAGE_POWER_ON> <TITLE VAL="Power On The NAS"/> <DESC1 VAL="Connect the power adapter."/> <DESC1 VAL=""/> <DESC1 VAL=""/> <DESC2 VAL="Please switch the device on "/> <DESC2 VAL="and ensure the power LED on "/> <DESC2 VAL="the front of the unit is lit before"/> <DESC2 VAL="clicking the NEXT button."/> <DESC2 VAL=""/> <DESC2 VAL=""/> </PAGE_POWER_ON> <PAGE_SELECT_DEVICE> <TITLE VAL="Select A Device"/> <DESC1 VAL="Please select a device:"/> <NOTE1 VAL="Note: The power LED of the selected "/> <NOTE1 VAL="ShareCenter will blink."/> </PAGE_SELECT_DEVICE> <PAGE_ADMIN_PASSWORD> <TITLE VAL="Input The Admin Password"/> <DESC1 VAL="Enter your administrator account password in order to login to your NAS."/> <DESC1 VAL="For the first install, the password should be blank, but also the username "/> <DESC1 VAL="should be ”admin”."/> <FIELD1 VAL="Username:"/> <FIELD2 VAL="Password:"/> <NOTE1 VAL=""/> <NOTE1 VAL=""/> </PAGE_ADMIN_PASSWORD> <PAGE_CREATE_NEW_PASSWORD> <TITLE VAL="Create A New Password For Your NAS"/> <DESC1 VAL="Create a new password to secure your NAS. You will need to use 'admin' as "/> <DESC1 VAL="the username and the new password you have created whenever you login to "/> <DESC1 VAL="the GUI of your ShareCenter."/> <FIELD1 VAL="Admin ID:"/> <FIELD2 VAL="Password:"/> <FIELD3 VAL="Confirm Password:"/> <NOTE1 VAL="Note: Password must contain at least 5-16 characters."/> </PAGE_CREATE_NEW_PASSWORD> <PAGE_CONF_IP> <TITLE VAL="Configure Device IP"/> <DESC1 VAL="If you want to set an IP address for your ShareCenter please select ”Static IP” and "/> <DESC1 VAL="enter the required information. Otherwise click NEXT."/> <DESC1 VAL=""/> <FIELD1 VAL="DHCP Client"/> <FIELD2 VAL="Static IP"/> <FIELD3 VAL="IP Address:"/> <FIELD4 VAL="Subnet Mask:"/> <FIELD5 VAL="Gateway:"/> <FIELD6 VAL="DNS1:"/> <FIELD7 VAL="DNS2:"/> </PAGE_CONF_IP> <PAGE_CONF_INFO> <TITLE VAL="Configure Device Information"/> <DESC1 VAL="If you have a workgroup other than your Operating System's default, or if you want to "/> <DESC1 VAL="customize the device name and description of your ShareCenter, please enter the "/> <DESC1 VAL="information below. Otherwise click NEXT."/> <DESC1 VAL=""/> <FIELD1 VAL="Workgroup:"/> <FIELD2 VAL="Name:"/> <FIELD3 VAL="Description:"/> </PAGE_CONF_INFO> <PAGE_INTRO_DDNS> <TITLE VAL="Introducing Dynamic DNS Service"/> <DESC1 VAL="Enabling Dynamic DNS (DDNS) allows you access your ShareCenter"/> <DESC1 VAL="from the Internet by using a domain name. Most broadband Internet "/> <DESC1 VAL="Service Providers assign a dynamic (changing) IP address. Using a "/> <DESC1 VAL="DDNS service provider, you can enter a hostname to connect to your "/> <DESC1 VAL="NAS no matter what your IP address is."/> <DESC1 VAL=""/> <FIELD1 VAL="Do you have a DDNS account?"/> <FIELD2 VAL="Yes"/> <FIELD3 VAL="No"/> </PAGE_INTRO_DDNS> <PAGE_CONF_DDNS> <TITLE VAL="Configure DDNS Settings"/> <DESC1 VAL="Enter your DDNS account information so that you can connect to your NAS using "/> <DESC1 VAL="a domain name instead of an IP address."/> <DESC1 VAL=""/> <FIELD1 VAL="Server Address:"/> <FIELD2 VAL="Host Name:"/> <FIELD3 VAL="(e.g.: me.domain.net)"/> <FIELD4 VAL="Username or Key:"/> <FIELD5 VAL="Password or Key:"/> <FIELD6 VAL="Verify Password or Key:"/> <SELECT1 VAL="Select Dynamic DNS Server"/> <SELECT1 VAL="www.dlinkddns.com"/> <SELECT1 VAL="www.DynDNS.org(Custom)"/> <SELECT1 VAL="www.DynDNS.org(Free)"/> <SELECT1 VAL="no-ip.DDNS"/> <SELECT1 VAL="www.tzo.com"/> <NOTE1 VAL="Note: To enable this function, port number 80 needs to be "/> <NOTE1 VAL="opened to the NAS from your local router's setup."/> </PAGE_CONF_DDNS> <PAGE_CONF_TIME> <TITLE VAL="Configure System Time"/> <DESC1 VAL="Configure Time Zone, NTP server, system Date and Time."/> <FIELD1 VAL="Time Zone:"/> <FIELD2 VAL="Enable NTP Server:"/> <FIELD3 VAL="NTP Server:"/> <FIELD4 VAL="Date and Time:"/> <FIELD5 VAL="Hour:"/> <FIELD6 VAL="Minute:"/> <FIELD7 VAL="Second:"/> <SELECT1 VAL="(GMT-12:00) International Date Line West "/> <SELECT1 VAL="(GMT-11:00) Midway Island, Samoa "/> <SELECT1 VAL="(GMT-10:00) Hawaii "/> <SELECT1 VAL="(GMT-09:00) Alaska "/> <SELECT1 VAL="(GMT-08:00) Pacific Time (US & Canada);Tijuana "/> <SELECT1 VAL="(GMT-07:00) Arizona "/> <SELECT1 VAL="(GMT-07:00) Chihuahua, La Paz, Mazatlan "/> <SELECT1 VAL="(GMT-07:00) Mountain Time (US & Canada) "/> <SELECT1 VAL="(GMT-06:00) Central America, Saskatchewan "/> <SELECT1 VAL="(GMT-06:00) Central Time (US & Canada) "/> <SELECT1 VAL="(GMT-06:00) Guadalajara, Mexico City, Monterrey "/> <SELECT1 VAL="(GMT-05:00) Bogota, Lima, Quito "/> <SELECT1 VAL="(GMT-05:00) Eastern Time (US & Canada) "/> <SELECT1 VAL="(GMT-05:00) Indiana (East) "/> <SELECT1 VAL="(GMT-04:00) Atlantic Time (Canada) "/> <SELECT1 VAL="(GMT-04:00) Caracas, La Paz "/> <SELECT1 VAL="(GMT-04:00) Santiago, Georgetown "/> <SELECT1 VAL="(GMT-03:30) Newfoundland "/> <SELECT1 VAL="(GMT-03:00) Brasilia, Buenos Aires "/> <SELECT1 VAL="(GMT-03:00) Greenland "/> <SELECT1 VAL="(GMT-02:00) Mid-Atlantic "/> <SELECT1 VAL="(GMT-01:00) Azores "/> <SELECT1 VAL="(GMT-01:00) Cape Verde Is. "/> <SELECT1 VAL="GMT Casablanca, Monrovia "/> <SELECT1 VAL="GMT Greenwich Mean Time : Dublin, Edinburgh, Lisbon, London "/> <SELECT1 VAL="(GMT+01:00) Amsterdam, Berlin, Bern, Rome, Stockholm, Vienna "/> <SELECT1 VAL="(GMT+01:00) Belgrade, Bratislava, Budapest, Ljubljana, Prague"/> <SELECT1 VAL="(GMT+01:00) Brussels, Copenhagen, Madrid, Paris "/> <SELECT1 VAL="(GMT+01:00) Sarajevo, Skopje, Warsaw, Zagreb "/> <SELECT1 VAL="(GMT+01:00) West Central Africa "/> <SELECT1 VAL="(GMT+02:00) Athens, Istanbul, Minsk, Bucharest "/> <SELECT1 VAL="(GMT+02:00) Cairo "/> <SELECT1 VAL="(GMT+02:00) Harare, Pretoria, Jerusalem "/> <SELECT1 VAL="(GMT+02:00) Helsinki, Kyiv, Riga, Sofia, Tallinn, Vilnius "/> <SELECT1 VAL="(GMT+03:00) Baghdad, Kuwait, Riyadh "/> <SELECT1 VAL="(GMT+03:00) Moscow, St. Petersburg, Volgograd "/> <SELECT1 VAL="(GMT+03:00) Nairobi, Tehran "/> <SELECT1 VAL="(GMT+04:00) Abu Dhabi, Muscat, Kabul "/> <SELECT1 VAL="(GMT+04:00) Baku, Tbilisi, Yerevan "/> <SELECT1 VAL="(GMT+05:00) Ekaterinburg "/> <SELECT1 VAL="(GMT+05:00) Islamabad, Karachi, Tashkent "/> <SELECT1 VAL="(GMT+05:30) Chennai, Kolkata, Mumbai, New Delhi, Sri Jayawardenepura "/> <SELECT1 VAL="(GMT+05:45) Kathmandu "/> <SELECT1 VAL="(GMT+06:00) Almaty, Novosibirsk "/> <SELECT1 VAL="(GMT+06:00) Astana, Dhaka "/> <SELECT1 VAL="(GMT+06:30) Rangoon "/> <SELECT1 VAL="(GMT+07:00) Bangkok, Hanoi, Jakarta "/> <SELECT1 VAL="(GMT+07:00) Krasnoyarsk "/> <SELECT1 VAL="(GMT+08:00) Beijing, Chongqing, Hong Kong, Taipei "/> <SELECT1 VAL="(GMT+08:00) Irkutsk, Ulaan Bataar "/> <SELECT1 VAL="(GMT+08:00) Kuala Lumpur, Singapore, Perth "/> <SELECT1 VAL="(GMT+09:00) Osaka, Sapporo, Tokyo, Seoul "/> <SELECT1 VAL="(GMT+09:00) Yakutsk "/> <SELECT1 VAL="(GMT+09:30) Adelaide "/> <SELECT1 VAL="(GMT+09:30) Darwin "/> <SELECT1 VAL="(GMT+10:00) Brisbane, Guam, Port Moresby "/> <SELECT1 VAL="(GMT+10:00) Canberra, Melbourne, Sydney "/> <SELECT1 VAL="(GMT+10:00) Hobart "/> <SELECT1 VAL="(GMT+10:00) Vladivostok "/> <SELECT1 VAL="(GMT+11:00) Magadan, Solomon Is., New Caledonia "/> <SELECT1 VAL="(GMT+12:00) Auckland, Wellington "/> <SELECT1 VAL="(GMT+12:00) Fiji, Kamchatka, Marshall Is. "/> <SELECT1 VAL="(GMT+13:00) Nuku'alofa "/> <SELECT2 VAL="Select NTP Server"/> <SELECT2 VAL="ntp1.dlink.com"/> <SELECT2 VAL="ntp.dlink.com.tw"/> </PAGE_CONF_TIME> <PAGE_CONF_EMAIL> <TITLE VAL="Configure E-mail Settings"/> <DESC1 VAL="Setting an E-MAIL address will allow the ShareCenter to send out E-MAIL alert "/> <DESC1 VAL="messages which can provide helpful with the management and safeguarding of "/> <DESC1 VAL="important data."/> <DESC1 VAL=""/> <FIELD1 VAL="Login Method:"/> <FIELD2 VAL="Account:"/> <FIELD3 VAL="Anonymous:"/> <FIELD4 VAL="User Name:"/> <FIELD5 VAL="Password:"/> <FIELD6 VAL="Port:"/> <FIELD7 VAL="SMTP Server:"/> <FIELD8 VAL="Sender E-mail:"/> <FIELD9 VAL="Receiver E-mail:"/> <FIELD10 VAL="Secure Connection"/> </PAGE_CONF_EMAIL> <PAGE_DISK_INFO> <TITLE VAL="Disk Information"/> <DESC1 VAL="Note: If you would like to make advanced configuration changes to the Current RAID type "/> <DESC1 VAL="shown above, login to the Share Center's Web UI using your browser (e.g. Internet "/> <DESC1 VAL="Explorer); then click on the Disk Management icon located under the Management Tab "/> <DESC1 VAL="to access the advanced disk settings."/> <DESC1 VAL=""/> <DESC1 VAL=""/> <FIELD1 VAL="Current RAID Type"/> </PAGE_DISK_INFO> <PAGE_CONF_RAID> <TITLE VAL="RAID Configuration"/> <DESC1 VAL="Choose the RAID type you would like to use."/> <FIELD1 VAL="Physical Disk Info"/> <FIELD2 VAL="Slot"/> <FIELD3 VAL="Vendor"/> <FIELD4 VAL="Model"/> <FIELD5 VAL="Serial Number"/> <FIELD6 VAL="Size"/> <FIELD7 VAL="Select File System"/> <FIELD8 VAL="Standard"/> <FIELD9 VAL="Standard: Creates two separate volumes (or one volume if only one hard drive is present). Each hard drive is its own volume. "/> <FIELD10 VAL="JBOD"/> <FIELD11 VAL="JBOD: Combines both hard drives in a linear fashion which will create one large volume geared towards maximum available space. "/> <FIELD12 VAL="RAID 0"/> <FIELD13 VAL="RAID 0: Combines both hard drives in a striped fashion which will create one large volume geared towards maximum performance. "/> <FIELD14 VAL="RAID 1"/> <FIELD15 VAL="RAID 1: (Recommended) Mirrors the hard drives for redundancy. If one hard drive fails, the other still has all of the data. It will re-mirror, restoring maximum data protection."/> <FIELD16 VAL="Auto-Rebuild Setting"/> <FIELD17 VAL="Enable Auto-Rebuild"/> <FIELD18 VAL="Disable Auto-Rebuild"/> </PAGE_CONF_RAID> <PAGE_MAP_DRIVE> <TITLE VAL="Map Drive To Network"/> <DESC1 VAL="Please choose a drive letter that will correspond to your network storage device."/> <DESC1 VAL=""/> <FIELD1 VAL="Available drive 1 letter:"/> <FIELD2 VAL="Available drive 2 letter:"/> <FIELD3 VAL="Available Drive Letters"/> </PAGE_MAP_DRIVE> <PAGE_CONF_SUMMARY> <TITLE VAL="Volume Configuration Summary"/> <DESC1 VAL="Below is the summary of your configuration information, including the "/> <DESC1 VAL="Volume Name(s), RAID Type selected, Total Hard Drive Capacity, and "/> <DESC1 VAL="the Drive Letter that will be mapped to you computer."/> <DESC1 VAL=""/> <FIELD1 VAL="Total Drive(s):"/> <FIELD2 VAL="Volume Name:"/> <FIELD3 VAL="RAID Type:"/> <FIELD4 VAL="Total Hard Drive Capacity:"/> <FIELD5 VAL="Drive letter:"/> <NOTE1 VAL="Click NEXT to proceed to Hard Drive Formatting."/> </PAGE_CONF_SUMMARY> <PAGE_FORMAT_HD> <TITLE VAL="Formatting Hard Drives"/> <DESC1 VAL="The drives in your device are now being formatted, please wait a moment..."/> <FIELD1 VAL="Initializing"/> <FIELD2 VAL="Volume_1 formatting"/> <FIELD3 VAL="Volume_2 formatting"/> <FIELD4 VAL="Success"/> </PAGE_FORMAT_HD> <PAGE_FORMAT_COMPLETED> <TITLE VAL="Format Completed"/> <DESC1 VAL="Format successful!"/> </PAGE_FORMAT_COMPLETED> <PAGE_SETUP_COMPLETE> <TITLE VAL="Setup Is Complete!"/> <DESC1 VAL="You have successfully completed the installation of your ShareCenter."/> <DESC1 VAL=""/> <DESC1 VAL=""/> <FIELD1 VAL="Name:"/> <FIELD2 VAL="IP Address:"/> <FIELD3 VAL="Current Time Zone:"/> <FIELD4 VAL="Current Time:"/> <FIELD5 VAL="Total Drive(s):"/> <FIELD6 VAL="Volume Name:"/> <FIELD7 VAL="RAID Type:"/> <FIELD8 VAL="Total Hard Drive Capacity:"/> <FIELD9 VAL="Drive letter:"/> <NOTE1 VAL="Click on FINISH to exit the setup."/> </PAGE_SETUP_COMPLETE> <PAGE_SELECT_ADDON_PACKAGE> <TITLE VAL="Selecting Add-on Packages"/> <DESC1 VAL="Select the Add-on packages below that you would like to install."/> <DESC1 VAL=""/> <DESC1 VAL=""/> </PAGE_SELECT_ADDON_PACKAGE> <PAGE_INSTALL_ADDON_PACKAGE> <TITLE VAL="Installing Add-on Packages"/> <DESC1 VAL="The device is now installing the selected add-on packages."/> <DESC1 VAL="Please wait until the packages are installed."/> <DESC1 VAL=""/> <DESC1 VAL=""/> <DESC2 VAL="Add-on packages installation completed."/> </PAGE_INSTALL_ADDON_PACKAGE> <PAGE_ADDON_PACKAGE_INSTALL_COMPLETE> <TITLE VAL="Add-on Packages Installation Completed"/> <DESC1 VAL="Please note that any enabled add-on packages will make use of the "/> <DESC1 VAL="ShareCenter’s processing resources, and may result in slower "/> <DESC1 VAL="ShareCenter operation."/> </PAGE_ADDON_PACKAGE_INSTALL_COMPLETE> <MESSAGE> <MSG0 VAL="Please confirm new password!"/> <MSG1 VAL="You have input a blank password, do you want to proceed?"/> <MSG2 VAL="The password must not include the following characters: @ : / \ % '"/> <MSG3 VAL="The new password must be at least 5 characters in length. Please try again."/> <MSG4 VAL="Please enter a workgroup."/> <MSG5 VAL="Workgroup must not contain spaces."/> <MSG6 VAL="The Workgroup must not include the following characters: ~ ` @ # $ % ^ & * ( ) _ + = - { } [ ] | \ ; : " ' < > , . ? / "/> <MSG7 VAL="Please enter a name."/> <MSG8 VAL="The device name must not contain spaces."/> <MSG9 VAL="The name must not include the following characters: \ / : * ? " < > | . ; + = ~ ' [ ] { } @ # ( ) ! ' ^ $ % & , ` _"/> <MSG10 VAL="Please enter a description."/> <MSG11 VAL="The first character and last character can not be blank."/> <MSG12 VAL="Do you want to apply a DDNS account now?"/> <MSG13 VAL="Server Address cannot be empty!"/> <MSG14 VAL="Username cannot be empty!"/> <MSG15 VAL="Password cannot be empty!"/> <MSG16 VAL="The passwords you have entered do not match. Please try again."/> <MSG17 VAL="Select Time"/> <MSG18 VAL="Select NTP"/> <MSG19 VAL="Select Time Zone"/> <MSG20 VAL="Please enter a username."/> <MSG21 VAL="Please enter a password."/> <MSG22 VAL="Please enter a port number."/> <MSG23 VAL="Please enter a SMTP Server."/> <MSG24 VAL="Please enter a sender E-mail."/> <MSG25 VAL="Please enter a receiver E-mail."/> <MSG26 VAL="Please check sender E-mail address format."/> <MSG27 VAL="Please check receiver E-mail address format."/> <MSG28 VAL="Please enter a port number."/> <MSG29 VAL="Please enter a SMTP Server."/> <MSG30 VAL="Please enter a sender E-mail."/> <MSG31 VAL="Please enter a receiver E-mail."/> <MSG32 VAL="Please check sender E-mail address format."/> <MSG33 VAL="Please check receiver E-mail address format."/> <MSG34 VAL="Degrade"/> <MSG35 VAL="Sync"/> <MSG36 VAL="Install add-on package fail!"/> <MSG37 VAL="Do you want to exit the setup wizard?"/> <MSG38 VAL="Do you want to leave the setup wizard?"/> <MSG39 VAL="Enable"/> <MSG40 VAL="Disable"/> <MSG41 VAL="Do you want to exit the setup wizard?"/> <MSG42 VAL="Please enter a username."/> <MSG43 VAL="Please enter a password."/> <MSG44 VAL="Please enter a port."/> <MSG45 VAL="Please enter a SMTP Server."/> <MSG46 VAL="Please enter a sender E-mail."/> <MSG47 VAL="Please enter a receiver E-mail."/> <MSG48 VAL="Please enter a port."/> <MSG49 VAL="Please enter a SMTP Server."/> <MSG50 VAL="Please enter a sender E-mail."/> <MSG51 VAL="Please enter a receiver E-mail."/> <MSG52 VAL="E-mail setting success!"/> <MSG53 VAL="Test E-mail: Failure"/> <MSG54 VAL="Test E-mail: Sent"/> <MSG55 VAL="Do you want to leave the setup wizard and go to the Web GUI Page for advanced configuration?"/> <MSG56 VAL="Please check if the power LED is blinking on the ShareCenter’s front panel. If not, you may have selected the wrong ShareCenter device."/> <MSG57 VAL="Setting fail."/> <MSG58 VAL="Login fail, please try again or leave the password blank."/> <MSG59 VAL="Authentication fail!"/> <MSG60 VAL="Set password fail!"/> <MSG61 VAL="Set hostname fail!"/> <MSG62 VAL="Authentication fail!"/> <MSG63 VAL="E-mail setting fail!"/> <MSG64 VAL="Format disk fail!"/> <MSG65 VAL="Please select two different drive letters!"/> <MSG66 VAL="Not a valid IP address."/> <MSG67 VAL="Please enter an IP address."/> <MSG68 VAL="Not a valid IP address."/> <MSG69 VAL="Invalid IP Address. Please try again."/> <MSG70 VAL="Not a valid subnet mask."/> <MSG71 VAL="Please enter a subnet mask address."/> <MSG72 VAL="Not a valid subnet mask."/> <MSG73 VAL="The IP address input is the broadcast address for the set subnet mask and cannot be used. Enter a correct combination of the IP address and subnet mask."/> <MSG74 VAL="Not a valid gateway address."/> <MSG75 VAL="You entered an incorrect TCP/IP configuration. Please try again."/> <MSG76 VAL="Not a valid gateway address."/> <MSG77 VAL="Not a valid DNS1."/> <MSG78 VAL="Not a valid DNS1."/> <MSG79 VAL="Not a valid DNS2."/> <MSG80 VAL="Not a valid DNS2."/> <MSG81 VAL="Invalid IP address. The first set of numbers must range between 1 and 223."/> <MSG82 VAL="Invalid IP address. The second set of numbers must range between 0 and 255."/> <MSG83 VAL="Invalid IP address. The third set of numbers must range between 0 and 255."/> <MSG84 VAL="Invalid IP address. The fourth set of numbers must range between 1 and 254."/> <MSG85 VAL="Invalid subnet mask address. The first set of numbers must range between 0 and 255."/> <MSG86 VAL="Invalid subnet mask address. The second set of numbers must range between 0 and 255."/> <MSG87 VAL="Invalid subnet mask address. The third set of numbers must range between 0 and 255."/> <MSG88 VAL="Invalid subnet mask address. The fourth set of numbers must range between 0 and 255."/> <MSG89 VAL="Invalid gateway address. The first set of numbers must range between 1 and 223."/> <MSG90 VAL="Invalid gateway address. The second set of numbers must range between 1 and 255."/> <MSG91 VAL="Invalid gateway address. The third set of numbers must range between 1 and 255."/> <MSG92 VAL="Invalid gateway address. The fourth set of numbers must range between 1 and 255."/> <MSG93 VAL="Invalid DNS1 address. The first set of numbers must range between 1 and 223."/> <MSG94 VAL="Invalid DNS1 address. The second set of numbers must range between 0 and 255."/> <MSG95 VAL="Invalid DNS1 address. The third set of numbers must range between 0 and 255."/> <MSG96 VAL="Invalid DNS1 address. The fourth set of numbers must range between 0 and 255."/> <MSG97 VAL="Invalid DNS2 address. The first set of numbers must range between 1 and 223."/> <MSG98 VAL="Invalid DNS2 address. The second set of numbers must range between 0 and 255."/> <MSG99 VAL="Invalid DNS2 address. The third set of numbers must range between 0 and 255."/> <MSG100 VAL="Invalid DNS2 address. The fourth set of numbers must range between 0 and 255."/> <MSG101 VAL="Standard: Creates two separate volumes (or one volume if only one hard drive is present). Each hard drive is its own volume."/> <MSG102 VAL="JBOD: Combines both hard drives in a linear fashion which will create one large volume geared towards maximum available space."/> <MSG103 VAL="RAID 0: Combines both hard drives in a striped fashion which will create one large volume geared towards maximum performance."/> <MSG104 VAL="RAID 1: (Recommended) Mirrors the hard drives for redundancy. If one hard drive fails, the other still has all of the data. It will re-mirror, restoring maximum data protection."/> <MSG105 VAL="E-mail setting fail!"/> <MSG106 VAL="You are about to format the hard drive(s). All data will be erased. Do you wish to continue?"/> <MSG107 VAL="Please download the Squeeze Center package (squeezecenter-7.3.2.tgz) from the Logitech web site place the package under Volume_1 folder."/> <MSG108 VAL="Download"/> <MSG109 VAL="The new password must not contain spaces."/> <MSG117 VAL="Please enter a gateway address."/> <MSG118 VAL="Formating timeout or ShareCenter can't be found! Do you want to retry?"/> </MESSAGE> <DLG_DDNS_ACCOUNT_DESC> <DESC1 VAL="How to apply and configure a DDNS account"/> <DESC2 VAL="1. Sign up for D-Link's Free DDNS service at"/> <DESC2 VAL=""/> <DESC3 VAL="2. Create an account"/> <DESC3 VAL="You first need to create an account. After entering your user information, you will be sent an "/> <DESC3 VAL="e-mail to verify your e-mail address and confirm your account. You can then log in. You can "/> <DESC3 VAL="also use this username and password at www.dyndns.com"/> <DESC3 VAL=""/> <DESC4 VAL="3. Create a hostname"/> <DESC4 VAL="After your account is confirmed, login. Click the add host link, fill in a host, and then click ”Save” "/> <DESC4 VAL="If you create a DNS query for the hostname, you will get the IP address back that you entered. "/> <DESC4 VAL=""/> <DESC4 VAL=""/> <DESC5 VAL="4. Configure your NAS"/> <DESC5 VAL="To make sure that your hostname always matches your IP address as it changes, your NAS "/> <DESC5 VAL="has an update client that monitors your IP address and will update the hostname should the IP"/> <DESC5 VAL="address change. "/> <DESC5 VAL="Enter your username, password, and hostname. Select an appropriate DDNS server from the "/> <DESC5 VAL="list. Your NAS should start updating."/> <DESC5 VAL=""/> <DESC6 VAL="5. Configure your Router"/> <DESC6 VAL="To enable this function, port number 80 needs to be opened to the NAS from your local router's "/> <DESC6 VAL="setup."/> <BUTTON1 VAL="Close"/> </DLG_DDNS_ACCOUNT_DESC> <DLG_PASSWORD_MSG> <DESC1 VAL="Have not entered a password, do you still wish to proceed?"/> <BUTTON1 VAL="Yes"/> <BUTTON2 VAL="No"/> </DLG_PASSWORD_MSG> <DLG_NTP_FAIL> <DESC1 VAL="Your device failed to update with the time and date. Please check your NTP server setting. "/> <BUTTON1 VAL="Back"/> <BUTTON2 VAL="Skip"/> </DLG_NTP_FAIL> <DLG_DDNS_FAIL> <DESC1 VAL="Unfortunately we cannot update DDNS account status. Please:"/> <DESC1 VAL="1. Check your Internet connection for your ShareCenter."/> <DESC1 VAL="2. Open port 80 on your router."/> <DESC1 VAL="3. Check the DDNS account settings."/> <BUTTON1 VAL="Back"/> <BUTTON2 VAL="Skip"/> </DLG_DDNS_FAIL> </DNS-320>